添加剂与铝合金的相互作用研究 Ⅰ.静态反应膜及油润滑下的摩擦学性能

静态下分别于２５℃，９０℃及１８０℃下进行硫化异丁烯（ＳＯ）、亚磷酸二正丁酯（ＤＢＰ）、ＳＯ＋ＤＢＰ的混合物（质量比２０∶１）、二烷基二硫代磷酸锌（ＺＤＤＰ）及十二酸（ＬＡ）５种添加剂均以质量分数为２％的比例添加到液体石蜡（ＬＰ）中与铝合金进行油浸试验．用动－静摩擦系数精密测定仪评价了在铝合金表面上所形成的静态反应膜的摩擦磨损行为，并考察了上述添加剂在ＬＰ中对铝合金－钢摩擦副的润滑作用．结果表明：静态反应膜的摩擦磨损行为与添加剂的化学活性密切相关，其中ＤＢＰ最易与铝合金发生反应，故其反应膜具有最低的摩擦系数和最长的耐磨寿命；ＺＤＤＰ在１８０℃下的静态反应膜具有较低的摩擦系数和较长的耐磨寿命；ＳＯ、ＳＯ与ＤＢＰ的混合物及ＬＡ的静态反应膜则不具有减摩抗磨性能，预示这些添加剂在ＬＰ中不与铝合金发生较强的化学作用．含上述添加剂的ＬＰ润滑下的摩擦磨损试验显示，ＤＢＰ与ＺＤＤＰ具有较好的摩擦学性能．这表明添加剂在铝合金表面静态反应膜的摩擦磨损试验结果与其在常规润滑下的具有较好的相关性．     

精密角接触球轴承的固体润滑失效分析

角接触球轴承是航天器的许多重要功能的实施部件，因而对其润滑性能的要求极为严格，迫切需要弄清其润滑失效机理。因此，对ＭｏＳ２溅射膜润滑的Ｃ６２０５球轴承进行了寿命试验，进而对经过丙酮超声清洗的各元件工作面的形貌和组成作了系统分析。     

Diffuse mode bifurcation of soil causing convection-like shear investigated by group-theoretic image analysis

Diffuse mode bifurcation of soil under plane-strain compression test is shown, by means of an image analysis based on group-theoretic bifurcation theory, to trigger convection-like shear and to precede shear band formation. First digital photos of Toyoura sand specimens are processed by PIV (particle image velocimetry) to gather digitized images of deformation. Next bifurcation from a uniform state is detected by expanding these images into the double Fourier series and finding a predominant harmonic diffuse bifurcation mode based on that theory. This harmonic bifurcation mode, which is the mixture of a few harmonic functions, expresses complex convection-like shear. Last bifurcation from a non-uniform state is detected by decomposing each image into a few images with different symmetries to extract non-harmonic diffuse bifurcation modes. Diffuse modes of bifurcation, which hitherto were hidden behind predominant uniform compressive deformation, have thus been made transparent by virtue of the group-theoretic image analysis proposed. A possible course of deformation suggested herein is the evolution of diffuse mode bifurcation with a convection-like bifurcation mode breaking uniformity and symmetry, followed by the formation of shear bands through localization.     

基于界面端奇异性理论的单纤维拔出试验的试件设计

在单纤维拔出试验中，由于试件的界面端存在应力奇异性，这使试验所得到的界面剪切强度数据失去合理性[1]。但从文献[1]关于微珠脱粘试验研究的结论中可以发现当基体的楔形角小于某临界角度后，微珠试件界面端应力奇异性几乎消失。由此启发我们设计出一种楔形角小于该纤维／基体系统临界角的锥面的拔出试件，这样即可以防止出现传统拔出试件在界面端的强应力奇异性，又可以避免微珠脱粘试验自身的缺陷。界面端具有任意楔形角的轴对称模型被用于分析和确定纤维／基体系统的临界角，对方程进行渐近展开和分离变量处理，根据边界条件可以得到关于特征值λ的特征方程，针对确定的纤维／基体系统可以得到特征值和楔形角的关系曲线，我们把应力奇异性指数等于-0．005时所对应的楔形角定义为临界角，以及根据临界角设计锥面拔出试件的方法。     

从自由试验提取约束结构模态

已有的“从自由试验提取约束结构模态”的动柔度法，仅适用于刚性支承情况．在工程中，弹性支承状态是常见的，为此，建立了这一情况下的提取方法．该方法具有普遍性，因为当支承刚度很大时，可得到刚性支承下的结果；当支承刚度很小时，便可获得工程中用橡皮绳悬吊结构后所测得的自由-自由试验模态．总之，当支承刚度为任何值时，用此方法都能提取到相应约束结构的满意试验模态参数．表明该算法是非常稳定的，对于工程应用至关重要．     

PVDF应力测量技术及在混凝土冲击实验中的应用

介绍了使用PVDF(polyvinylidene fluoride,聚偏二氟乙烯)应力计的应力直接测量技术。在SHPB装置上进行自制PVDF应力计动态压电系数的标定实验,分析了应力集中、横向泊松效应、摩擦效应对PVDF应力计信号及动态压电系数的影响。用PVDF应力计进行了混凝土的冲击压缩实验。利用混凝土前后端面PVDF应力计信号分析了实验过程中混凝土试样的应力均匀性。与应变计直测应变技术相结合得到了混凝土的动态应力-应变关系。     

Fluid Dynamics at Connections in Paediatric Cardiac Surgery*

The modified Blalock-Taussig shunt is a connection created between the systemic and pulmonary arterial circulations to improve pulmonary perfusion in children with congenital heart diseases. Survival of these patients is critically dependent on blood flow distribution between the pulmonary and systemic circulations, that in turn depends upon the fluid dynamic behaviour of the shunt. Computational fluid dynamics, structural analyses as well as in vitro experiments were carried out to derive a quantitative relationship between the shunt flow and the corresponding pressure drop. While computational fluid dynamics simulations were based on the assumption of rigid wall for the shunt and the arteries, proper distensible conduits were used in the in vitro study and the structural analysis of the anastomosis deformation. The results indicated that the internal pressure combined with wall distensibility modifies the cross-sectional area of the distal anastomosis (between the shunt and the pulmonary artery). This fact affects the pressure drop across the shunt, especially at low pressures. Based on the results from the computational analyses and the in vitro experiments, a relationship between pressure drop and flow in the shunt was obtained, which matches data from clinical measurements.     

纤维树脂界面剪切强度及纤维强度分布参数的实验测定

界面剪切强度及纤维强度分布参数是复合材料设计及应用研究中的重要参数，本文采用单纤维段埋入法测定了上述两个参数。通过实验研究说明了单纤维段埋入法是一种测定界面剪切强度及纤维强度分布参数的有效的实验方法；同时证实了基体的力学性能对界面剪切强度有着重要的影响。全部实验在自制的实验系统上完成     

Effects of dry density and thickness of sandy soil on impact response due to rockfall

Sand cushions against impact force are widely used for rockfall prevention covers. The objective of this paper is to investigate the effects of the dry density and thickness of a sand cushion on an impact response due to a falling weight likened to a rockfall. A series of laboratory experiments for a decomposed granite soil was executed in the combination of the mass and drop height of the weight. As a result, the impact pressure applied to the soil surface increases with the dry density, but it does not depend on the thickness of the soil. The earth pressure at the bottom of the mold increases with the dry density, and it decreases with the thickness of the soil. Therefore, the transmissibility of the impact pressure decreases rapidly with the thickness of the soil.     

有限元法在三轴转台机械系统设计中的应用

本文探讨了三轴转台机械系统的设计与计算问题，以惯性三轴测试转台和三轴模拟台为例，确定了多种运转状态下的有限元法计算模型，并对其进行了静、动态特性计算，比较分析了计算结果，为合理结构的设计提供了重要数据，说明了在三轴转台机械系统设计中有限元法的重要性